Dicyclohexylamine Manufacturing Process-manufacture,factory,supplier from China

The purity of dicyclohexylamine is better than 99.five%, that is 99% higher than the standard of peer organizations. recycling the economic chain can lessen the comprehensive value of the manufacturing facility. there are 3 aniline factories in dongying, shandong, huai 'an, jiangsu and tianji, shanxi within four hundred kilometers. the generation is mature, and the people have about twenty years of practical enjoy.

Dicyclohexylamine has the chemical properties of a secondary amine. It has a strong base and can form salts with various acids. Acylation may occur. In terms of solubility, dicyclohexylamine is slightly soluble in cold water but almost insoluble in hot water. Dry powder, carbon dioxide, soluble foam and sand are used to extinguish the fire.

The invention relates to a refining method of dicyclohexylamine, belonging to the technical field of organic chemistry.

The purity of dicyclohexylamine is better than ninety nine.5%, this is 99% higher than the identical old of peer companies. recycling the economic chain can reduce the complete fee of the manufacturing facility. there are 3 aniline factories in dongying, shandong, huai 'an, jiangsu and tianji, shanxi within 4 hundred kilometers. the technology is mature, and the human beings have approximately twenty years of realistic experience.

Distillation is the use of SiCl4, and the difference between the relative volatility of impurities components, through several partial gasification and partial condensation process, to achieve the separation of mixed liquid, so as to obtain high purity silicon tetrachloride products.

The principle is to reduce high purity trichlorosilane with high purity hydrogen on the high purity silicon core at about 1100℃ to generate polycrystalline silicon deposited on the silicon core. On the basis of the traditional Siemens process, the improved Siemens process is equipped with a supporting process of energy saving, consumption reduction, recycling and utilization of a large amount of H2, HCI, SiCI4 and other by-products and a large amount of by-production heat energy.

The invention relates to a method for the synthesis of N-chlorinated dicyclohexylamine with low concentration of sodium hypochlorite. The mass of dicyclohexylamine is weighed, and the amount of sodium hypochlorite of low concentration required for the reaction is calculated according to the molar ratio of dicyclohexylamine and sodium hypochlorite =1:1.051.20. Put dicyclohexylamine into the reactor, and keep the reactor temperature.

The purity of dicyclohexylamine is higher than ninety nine.5%, that is 99% better than the same old of peer groups. recycling the economic chain can lessen the comprehensive price of the producing facility. there are three aniline factories in dongying, shandong, huai 'an, jiangsu and tianji, shanxi within four hundred kilometers. the era is mature, and the people have about 20 years of practical enjoy.

At present, there are few reports on the quantitative analysis of dicyclohexylamine and impurities, so it is necessary to study them separately accurate quantitative analysis method. Since dicyclohexylamine has no ultraviolet absorption, the quantitative analysis method of dicyclohexylamine by high performance liquid chromatography evaporative light scattering detector was studied. 

The purity of dicyclohexylamine is higher than 99.5%, which is 99% higher than the standard of peer enterprises. Recycling the industrial chain can reduce the comprehensive cost of the factory. There are three aniline factories in Dongying, Shandong, Huai 'an, Jiangsu and Tianji, Shanxi within 400 kilometers. The technology is mature, and the workers have about twenty years of practical experience. Stable supply, with an annual output of 36,000 tons, of which dicyclohexylamine has an annual output of 12,000 tons.

Devices that use tail gas to recover cyclohexylamine are characterized in that they include: spray tower, circulating pump, condenser, defogger, photooxygen catalytic oxidizer, ozone treatment device, blower, chimney. Described in the circulating pump and spray the bottom connection, as described in the other side of the circulating pump are connected to the condenser, the condenser and the upper spray tower connection, described in the spray tower are connected to the top of demister, described in the mist bottom and photocatalytic oxidation, photocatalytic oxidation is described, ozone

The invention relates to a tail gas refining method, especially a method for hydrogenation of aniline to produce dicyclohexylamine tail gas deamination and hydrogen refining, which belongs to the technical field of chemical industry.

The process relates to a tail gas refining method, in particular to the hydrogenation of aniline to prepare cyclohexylamine and the deamination of dicyclohexylamine tail gas to refine hydrogen.

A high purity trichlorosilane differential pressure coupled distillation process, using the high pressure tower top steam as the heat source of the low pressure tower reboiler, realized the energy integration and process optimization. Chemical simulation software PRO/Ⅱ8.1 was used to simulate the design parameters of two columns of high purity trichlorosilane differential pressure coupled distillation process and three columns of high purity trichlorosilane differential pressure coupled distillation process.

The main by-product of trichlorosilane, silicon tetrachloride, is also the main raw material for the manufacture of silicone, its finished products are silicone ester, silicone oil, high temperature insulating paint, silicone resin, silicone rubber and heat resistant cushion lining materials. High purity silicon tetrachloride is also an important raw material for manufacturing high purity silicon dioxide, inorganic silicon compounds, quartz fibers and optical fibers.

Nitrocyclohexane reduction method: This method takes nitrocyclohexane and hydrogen as raw materials, using reducing agent to generate cyclohexylamine, because nitrocyclohexane raw materials are difficult to obtain, this method is basically eliminated. Moreover, the process has some defects, such as low one-way conversion of aniline and poor selectivity of dicyclohexylamine.

Silicon tetrachloride is mainly used in the manufacture of silicone esters, gaseous silica, silicone monomer, silicone oil, high temperature insulating paint, silicone resin, silicone rubber and so on. High-purity silicon tetrachloride is the main raw material for manufacturing fiber prefabricated rod, and the quality of fiber prefabricated rod directly determines the fiber performance. Therefore, high-purity silicon tetrachloride is the core raw material of fiber industry.

DCHA at home and abroad is usually a by-product of CHA production. In the process of CHA synthesis by aniline hydrogenation, about 10% of DCHA can be obtained by by-product. In addition, according to the different catalysts, the yield of DCHA prepared by aniline hydrogenation can reach up to 70%, and the yield of cyclohexylamine (CHA) is 30%.Benzene, cyclohexane, cyclohexanol, N-cyclohexylcyclohexamine, phenylcyclohexylamine and other by-products will be generated in the reaction.

The invention relates to a synthesis method of dicyclohexylamine, which comprises the following steps: in a hydrogenation reactor, aniline and hydrogen are hydrogenated in gas phase under the catalyst to obtain DCHA crude product.The replacement reaction was carried out with aniline and DCHA crude product to obtain the replacement mother liquor. The replacement mother liquor was delight and refined, and DCHA product was obtained at the top of the refining tower.

Silicon tetrachloride is an important raw material and intermediate product in the process of organic silicon synthesis and polysilicon production. Under different environmental conditions, silicon tetrachloride can react with a variety of substances to produce new substances.

Cyclohexanol gas-phase ammoniation method: it is the liquid hydrogenation of cyclohexanol and ammonia to cyclohexanamine and dicyclohexanamine under the action of nickel/silica catalyst. The yield of cyclohexanol and dicyclohexanamine is 3:1, and the conversion rate of cyclohexanol is about 70%, which has not been reported in industrialization in China.

The mixture of trichlorosilane and polysilicon, which is a by-product of the recombination from the bottom of the distillation column in the production of trichlorosilane and polysilicon, was used as raw material to prepare silica by gas phase hydrolysis. The effects of gasification temperature, flow rate and flow ratio of water vapor and chlorosilane mixture on physicochemical properties of the products were investigated.

It is obtained by catalytic hydrogenation of aniline and can be divided into atmospheric pressure method and pressure method. In addition, cyclohexamine can be prepared by catalytic ammonolysis of cyclohexane or cyclohexanol, reduction of nitrocyclohexane, and catalytic ammonolysis of cyclohexanone in the presence of hydrogen.The refining process often contains impurities such as aniline and water.

At present, amine salt type corrosion inhibitors are widely used and have superior effects. Through physical and chemical analysis of the sample, ultraviolet spectrum, infrared spectrum, nuclear magnetic resonance spectroscopy and ion chromatography and other series of analysis and  prediction to determine the role of different ions of dicyclohexylamine salt corrosion inhibitor in steel corrosion analysis, and finally determined that the solid sample may be dicyclohexylamine nitrite.