Corrosion Inhibitor-manufacture,factory,supplier from China

Cyclohexylamine (CHA) is a primary amine, can be miscible with water with infinite ratio, the molecule is small, easy to adsorb on the metal surface, its shielding effect is better than long chain primary amine and secondary amine, so it can effectively prevent the invasion of corrosive ions, thereby improving corrosion resistance, especially the ability to inhibit corrosion.The corrosion inhibition of 304 stainless steel by cyclohexylamine in sodium chloride medium was studied in detail.

A vapor phase corrosion inhibitor preparation method, including the following steps :a. Dispersing montmorillonite in deionized water, beating, stirring, and then taking the suspension of the solution to add morpholine, heating the solution to evaporate and precipitate crystals.b. Add formaldehyde to the solution in Step a and let it stand; add dicyclohexylamine and let it stand; then add the mixed solution of benzoic acid and acetone to the solution and let it stand to generate white slurry.

At present, amine salt type corrosion inhibitors are widely used and have superior effects. Through physical and chemical analysis of the sample, ultraviolet spectrum, infrared spectrum, nuclear magnetic resonance spectroscopy and ion chromatography and other series of analysis and  prediction to determine the role of different ions of dicyclohexylamine salt corrosion inhibitor in steel corrosion analysis, and finally determined that the solid sample may be dicyclohexylamine nitrite. 

A sulfonate of cyclohexylamine; used as an artificial flavoring in food, beverages, and medicine. Also used as an acid gas absorber. Used as a pH regulator for boiler feed water. Cyclohexylamine is a volatile substance that can easily reach the whole system after dosing.If pH is lower than 8.5, the treatment effect of cyclohexylamine is not good. Synthetic desulfurizer, rubber promoter, dye, antistatic agent, corrosion inhibitor, pesticide fungicide, insecticide and other intermediates. Used as boiler water treatment agent, corrosion inhibitor, rubber promoter, etc.

Cyclohexylamine, an organic compound with the chemical components of c6h13n, is a drab to yellow liquid, soluble in water and miscible in most organic solvents. It is mainly used as a solvent, and can also be used to prepare desulfurizer, rubber antioxidant, vulcanization accelerator (CZ), cyclamate, medical raw materials, chemical additives for plastics and textiles, boiler feed water treatment agent, metal corrosion inhibitor, emulsifier, preservative, antistatic agent and latex coagulant. 

Cyclohexylamine, an organic compound with the chemical formula of C6H13N, is a colorless to yellow liquid, soluble in water and miscible in most organic solvents. UsageIt is mainly used as solvent, and can also be used to prepare desulfurizer, rubber antioxidant, vulcanization accelerator, chemical additives for plastics and textiles, boiler feed water treatment agent, metal corrosion inhibitor, emulsifier, preservative, antistatic agent, latex coagulant, petroleum additive, bactericide, insecticide and dye intermediate.SpecificationProjectItemBest gradeFirst grade    

Silicon tetrachloride which chemical formula is SiCl4 is an inorganic compound, because silicon chloride only exists in the form of SiCl4, silicon tetrachloride is also directly called silicon chloride. The appearance of this product is light yellow liquid, and the appearance of high-purity silicon tetrachloride is colorless and transparent liquid, volatile, with special odor, toxicity and corrosion. Silicon tetrachloride can be miscible with benzene, chloroform, ether, carbon tetrachloride and other organic solvents. It can be hydrolyzed in humid air and react violently with water.

In recent years, China's polysilicon production has shown geometric development, but the disposal of polysilicon by-product silicon tetrachloride has become a difficult to step over the development of polysilicon industry "sill", let the silicon industry wear the hat of high pollution.

Silicon tetrachloride is mainly used in the manufacture of silicone esters, gaseous silica, silicone monomer, silicone oil, high temperature insulating paint, silicone resin, silicone rubber and so on. High-purity silicon tetrachloride is the main raw material for manufacturing fiber prefabricated rod, and the quality of fiber prefabricated rod directly determines the fiber performance. Therefore, high-purity silicon tetrachloride is the core raw material of fiber industry.

Distillation is the use of SiCl4, and the difference between the relative volatility of impurities components, through several partial gasification and partial condensation process, to achieve the separation of mixed liquid, so as to obtain high purity silicon tetrachloride products.

It is obtained by catalytic reduction of nickel or cobalt from aniline at high temperature and pressure. Cyclohexanol can also be reduced by phenol, oxidized to cyclohexanone, and then aminated with ammonia to obtain cyclohexanamine.This substance is harmful to the environment, and special attention should be paid to the pollution of water bodies. Acute poisoning may occur by inhalation of vapour. Irritant and corrosive to skin, eyes and mucous membranes, and can cause allergy through skin absorption.

A method of cyclohexylamine catalytic production of biodiesel with prickly ash seed oil as raw material is described as follows: prickly ash seed oil is mixed with methanol and the catalyst cyclohexylamine.

It is obtained by catalytic hydrogenation of aniline and can be divided into atmospheric pressure method and pressure method. In addition, cyclohexamine can be prepared by catalytic ammonolysis of cyclohexane or cyclohexanol, reduction of nitrocyclohexane, and catalytic ammonolysis of cyclohexanone in the presence of hydrogen.The refining process often contains impurities such as aniline and water.

In silicon tetrachloride purification, boron is the most difficult impurity to remove. Researchers have proposed compound method to remove boron from silicon tetrachloride, which has achieved satisfactory results and has been widely used in industrial production.

To explore the application value of ion chromatography in the detection of cyclohexylamine in workplace air. Workplaces containing cyclohexylamine in the production of raw materials were selected as sampling sites, and the content of cyclohexylamine in workplaces was detected by ion chromatography. At the same time, the precision and recovery rate of ion chromatography, desorption efficiency, sampling efficiency and other cation interference characteristics were analyzed.

Trichlorosilane is mainly used in the manufacture of polysilicon and silane coupling agents, among which polysilicon is the most important downstream application area of trichlorosilane, accounting for 32% of the consumption in 2021, and silane coupling agent consumption accounted for 25%. The market is still in good condition.

Silane coupling agent product price growth is very obvious, compared with the same period last year growth of 118%. Upstream raw material trichlorosilane price rise, silane products for the high price operation provides a strong support. Reporters learned that trichlorosilane is mainly used in the production of polysilicon, silane coupling agent, silane coupling agent is the second largest downstream market of trichlorosilane, in recent years the demand is more exuberant.

Electronic grade trichlorosilane sihc13 is colorless, flammable, corrosive liquid and has a suffocating odor. Hydrolyze rapidly in wet air to produce hydrogen chloride: boiling point 31.9 ':. Melting point 126.5 c:. Liquid density 134ukgi resistance: in the air "}", the flammability limit is B.9% - 7U}'u. Flash point - 28. U}.

Trichlorosilane is a higher degree of marketization, competition is more adequate industry. The price of industrial products is easily affected by upstream raw materials and downstream demand. Trichlorosilane production raw materials are mainly industrial silica powder and liquid chlorine, if the raw material prices rise sharply, it profits will be under pressure. The price fluctuation of trichlorosilane has little effect on the profits of polysilicon enterprises. Even if the price is temporarily low, polysilicon prices still have upward momentum. 

A high purity trichlorosilane differential pressure coupled distillation process, using the high pressure tower top steam as the heat source of the low pressure tower reboiler, realized the energy integration and process optimization. Chemical simulation software PRO/Ⅱ8.1 was used to simulate the design parameters of two columns of high purity trichlorosilane differential pressure coupled distillation process and three columns of high purity trichlorosilane differential pressure coupled distillation process.

The mixture of trichlorosilane and polysilicon, which is a by-product of the recombination from the bottom of the distillation column in the production of trichlorosilane and polysilicon, was used as raw material to prepare silica by gas phase hydrolysis. The effects of gasification temperature, flow rate and flow ratio of water vapor and chlorosilane mixture on physicochemical properties of the products were investigated.

Since May 2022, trichlorosilane has been sustained upward by the downward trend in silicon metal prices.

Trichlorosilane (TCS or SiHCl3) is generated as follows within a high temperature, pressurized reactor: Si + 3 HCl ➡ SiHCl3 + H2 ，Si + 3 SiCl4 +2 H2 ➡ 4 SiHCl3 .The TCS is then sent to the CVD (Chemical Vapor Desposition) reactor. In the Siemens process, high-purity silicon "starter" rods or hairpins are exposed to trichlorosilane at 1150 °C in the CVD reactor.

At present, there are two main synthesis methods of trichlorosilane: one is the traditional synthesis method, that is the silicon chloride method. The other is hydrolyzation of tetrachloride. At present, the mainstream method of polysilicon production is the modified Siemens method, using trichlorosilane reduction method. In recent years, with the continuous decline of polysilicon price, polysilicon production enterprises pay more and more attention to the control of production cost.