Aryl Cyclohexylamine-manufacture,factory,supplier from China

Cyclohexylamine, an organic compound with the chemical components of c6h13n, is a drab to yellow liquid, soluble in water and miscible in most organic solvents. It is mainly used as a solvent, and can also be used to prepare desulfurizer, rubber antioxidant, vulcanization accelerator (CZ), cyclamate, medical raw materials, chemical additives for plastics and textiles, boiler feed water treatment agent, metal corrosion inhibitor, emulsifier, preservative, antistatic agent and latex coagulant. 

A sulfonate of cyclohexylamine; used as an artificial flavoring in food, beverages, and medicine. Also used as an acid gas absorber. Used as a pH regulator for boiler feed water. Cyclohexylamine is a volatile substance that can easily reach the whole system after dosing.If pH is lower than 8.5, the treatment effect of cyclohexylamine is not good. Synthetic desulfurizer, rubber promoter, dye, antistatic agent, corrosion inhibitor, pesticide fungicide, insecticide and other intermediates. Used as boiler water treatment agent, corrosion inhibitor, rubber promoter, etc.

Devices that use tail gas to recover cyclohexylamine are characterized in that they include: spray tower, circulating pump, condenser, defogger, photooxygen catalytic oxidizer, ozone treatment device, blower, chimney. Described in the circulating pump and spray the bottom connection, as described in the other side of the circulating pump are connected to the condenser, the condenser and the upper spray tower connection, described in the spray tower are connected to the top of demister, described in the mist bottom and photocatalytic oxidation, photocatalytic oxidation is described, ozone

A method of cyclohexylamine catalytic production of biodiesel with prickly ash seed oil as raw material is described as follows: prickly ash seed oil is mixed with methanol and the catalyst cyclohexylamine.

The purity of hydrogen is high, and the purity of cyclohexylamine reaches over 99.95%, which is higher than the industry standard by 99.8%. The purity of dicyclohexylamine is higher than 99.5%, which is 99% higher than the standard of peer enterprises. Recycling the industrial chain can reduce the comprehensive cost of the factory. There are three aniline factories in Dongying, Shandong, Huai 'an, Jiangsu and Tianji, Shanxi within 400 kilometers. The technology is mature, and the workers have about twenty years of practical experience.

Cyclohexylamine, an organic compound with the chemical formula of C6H13N, is a colorless to yellow liquid, soluble in water and miscible in most organic solvents. UsageIt is mainly used as solvent, and can also be used to prepare desulfurizer, rubber antioxidant, vulcanization accelerator, chemical additives for plastics and textiles, boiler feed water treatment agent, metal corrosion inhibitor, emulsifier, preservative, antistatic agent, latex coagulant, petroleum additive, bactericide, insecticide and dye intermediate.SpecificationProjectItemBest gradeFirst grade    

Cyclohexylamine has the chemical properties of a primary amine. Carbonates that are strongly alkaline and absorb carbon dioxide in the air to form white crystals. It can react with acyl chloride, anhydride and ester to form N-acyl. React with nitrite to give alcohol. Hydroxymethyl compounds are formed by reaction with formaldehyde in alkaline solution. Reacts with carbon disulfide to form dithiocarbamate. Reacts with aldehydes to form Schiff bases.This product is used to prepare cyclohexanol, caprolactam, acetate fiber and nylon 6, etc.

By controlling the parameters in each step, such as time, temperature, pressure, etc.The yield of cyclohexylamine products is high, the product yield is more than 99%, the quality is stable, the yield is high, the production capacity is large, the side reaction is less, and a small amount of by-product dicyclohexylamine in the reaction can be recovered and purified, and the added value of the products can be increased.

It is obtained by catalytic reduction of nickel or cobalt from aniline at high temperature and pressure. Cyclohexanol can also be reduced by phenol, oxidized to cyclohexanone, and then aminated with ammonia to obtain cyclohexanamine.This substance is harmful to the environment, and special attention should be paid to the pollution of water bodies. Acute poisoning may occur by inhalation of vapour. Irritant and corrosive to skin, eyes and mucous membranes, and can cause allergy through skin absorption.

The process relates to a tail gas refining method, in particular to the hydrogenation of aniline to prepare cyclohexylamine and the deamination of dicyclohexylamine tail gas to refine hydrogen.

To explore the application value of ion chromatography in the detection of cyclohexylamine in workplace air. Workplaces containing cyclohexylamine in the production of raw materials were selected as sampling sites, and the content of cyclohexylamine in workplaces was detected by ion chromatography. At the same time, the precision and recovery rate of ion chromatography, desorption efficiency, sampling efficiency and other cation interference characteristics were analyzed.

It is obtained by catalytic hydrogenation of aniline and can be divided into atmospheric pressure method and pressure method. In addition, cyclohexamine can be prepared by catalytic ammonolysis of cyclohexane or cyclohexanol, reduction of nitrocyclohexane, and catalytic ammonolysis of cyclohexanone in the presence of hydrogen.The refining process often contains impurities such as aniline and water.

Cyclohexylamine (CHA) is a primary amine, can be miscible with water with infinite ratio, the molecule is small, easy to adsorb on the metal surface, its shielding effect is better than long chain primary amine and secondary amine, so it can effectively prevent the invasion of corrosive ions, thereby improving corrosion resistance, especially the ability to inhibit corrosion.The corrosion inhibition of 304 stainless steel by cyclohexylamine in sodium chloride medium was studied in detail.

The method of species co-production of cyclohexylamine and dicyclohexylamine and the catalyst system used for the method. The method includes the following steps :(1) the raw material aniline, cyclohexanone, ammonia, hydrogen after the loading load RhNi catalyst first section reactor, the first reaction liquid.(2) The reaction solution containing cyclohexylamine and dicyclohexylamine was obtained through the second stage reactor loaded with RhCo catalyst.

Foreign production and application are mainly concentrated in the western developed countries and regions, the main manufacturers are the United States Air Products company, Celanes company, Germany BASF, Bayer company and other scale manufacturers. But in Europe, cyclohexylamine has been in short supply due to the limitation of hydrogen feedstock. With the rapid development of the food additive cyclamate and rubber industry, the consumption of cyclohexylamine has been increasing at an average annual rate of more than 10%.

Nitrocyclohexane reduction method: This method takes nitrocyclohexane and hydrogen as raw materials, using reducing agent to generate cyclohexylamine, because nitrocyclohexane raw materials are difficult to obtain, this method is basically eliminated. Moreover, the process has some defects, such as low one-way conversion of aniline and poor selectivity of dicyclohexylamine.

The invention uses nitro-benzene and hydrogen as raw materials. Adding solvent, nitro-benzene and catalyst into the reaction kettle, controlling the reaction pressure of 0.5 ~ 4MPa, reaction temperature of 60 ~ 160℃, reaction for 2 ~ 8h, cyclohexylamine and dicyclohexylamine are obtained, and the catalyst used is Pd/CNTs catalyst or PD-Ni /CNTs catalyst. 

DCHA at home and abroad is usually a by-product of CHA production. In the process of CHA synthesis by aniline hydrogenation, about 10% of DCHA can be obtained by by-product. In addition, according to the different catalysts, the yield of DCHA prepared by aniline hydrogenation can reach up to 70%, and the yield of cyclohexylamine (CHA) is 30%.Benzene, cyclohexane, cyclohexanol, N-cyclohexylcyclohexamine, phenylcyclohexylamine and other by-products will be generated in the reaction.

A vapor phase corrosion inhibitor preparation method, including the following steps :a. Dispersing montmorillonite in deionized water, beating, stirring, and then taking the suspension of the solution to add morpholine, heating the solution to evaporate and precipitate crystals.b. Add formaldehyde to the solution in Step a and let it stand; add dicyclohexylamine and let it stand; then add the mixed solution of benzoic acid and acetone to the solution and let it stand to generate white slurry.

In silicon tetrachloride purification, boron is the most difficult impurity to remove. Researchers have proposed compound method to remove boron from silicon tetrachloride, which has achieved satisfactory results and has been widely used in industrial production.

In recent years, China's polysilicon production has shown geometric development, but the disposal of polysilicon by-product silicon tetrachloride has become a difficult to step over the development of polysilicon industry "sill", let the silicon industry wear the hat of high pollution.

Silicon tetrachloride is mainly used in the manufacture of silicone esters, gaseous silica, silicone monomer, silicone oil, high temperature insulating paint, silicone resin, silicone rubber and so on. High-purity silicon tetrachloride is the main raw material for manufacturing fiber prefabricated rod, and the quality of fiber prefabricated rod directly determines the fiber performance. Therefore, high-purity silicon tetrachloride is the core raw material of fiber industry.

SiCl4 is one of the most important inorganic silicon compounds, is a colorless, transparent, flowing smoke liquid, with suffocating odor, soluble in benzene, ether, chloroform and other most organic solvents. Silicon tetrachloride is a volatile liquid with strong asphyxiating odor. It can be used as raw materials for the production of gaseous silica, high purity silicon and organosilicide. The upstream of the silicon tetrachloride industry chain is the raw material market, mainly silicon powder, ferrosilicon, hydrogen chloride, etc.

The purity of dicyclohexylamine is better than 99.five%, that is 99% higher than the standard of peer organizations. recycling the economic chain can lessen the comprehensive value of the manufacturing facility. there are 3 aniline factories in dongying, shandong, huai 'an, jiangsu and tianji, shanxi within four hundred kilometers. the generation is mature, and the people have about twenty years of practical enjoy.